How To Set Timer On Outdoor Lights

Lets confront it, the instructions that come up with your intermatic timer require a technical writing degree to decipher. You just desire an easy way to apace reset & reprogram your low voltage landscape lighting timer. Nosotros've simplified these instructions to make it easier for you lot to reset & reprogram your timer and get back to enjoying your outdoor lights.

Bank check out our video walk through for programming your timer!

If you have a different kind of timer, click here to view our other timer tutorial videos.

Clear Timer Programs

Full Reset

The first step to resetting your timer is to completely clear all programs. You'll want to completely reset your timer to factory settings to ensure that all possible issues are wiped make clean from the timer'southward memory.

1. Take a paperclip and bend it so a point sticking out. Use the point from the paper prune to press in the small button located below the gray OK button on the face of the timer.

2. While holding in the modest reset button, simultaneously press and concur down the ON/OFF button. Agree downwards both buttons together for 5 seconds. Afterward you've released both buttons, the screen should flash zeros before displaying the clock flashing 12:00 a.chiliad.

If you neglect to press and hold downwardly both buttons, yous will not attain a full programme wipe.

Pro Tip: You'll know whether or not you achieved a total reset when you programme the appointment. If the date is not showing January 1st 2022, you lot'll demand to try once again.

Reprogramming Your Fourth dimension, Appointment & Location

In one case you've successfully reset your depression voltage mural lighting timer to nix, information technology's time to outset programming it. There are two parts to setting up your timer. First, y'all'll programme the time, date, and location. Second, yous'll setup the ON/OFF program to control the lights.

• Clock

After you lot've cleared out all the old programs, the clock will flash 12:00 a.m. To fix the hour, turn the round dial and curlicue through until you reach the correct hour. Be mindful of the a.m./p.m in the bottom right corner.

Once you've scrolled to the correct hour, push the OK push once to select.

After selecting the hour, the minutes will be flashing. Scroll through the minutes with the dial and select the desired minutes by pushing the OK button one time.

• Date

After completing the clock, your screen should read 1.1.12.

First, enter the year. The 12 volition be flashing. Use the punch to scroll to the correct year, then press the OK push in one case. Echo this stride to select the correct calendar month and the right day.

• Daylight Savings

In that location are two options hither depending on whether or non yous observes daylight savings.

1. The screen volition read DAYSAV with a flashing AUTO. If you lot do non observe daylight savings, use the dial to scroll until Car is replaced past MAN (Manual). While Human is flashing, press the OK button once. (proceed to next step: Location)

2. If you do observe daylight savings, select the flashing AUTO by pressing the OK button once. Your screen volition read ON, DAYSAV, Calendar month, 3WK 2. Select month 3 by pressing OK once. Select calendar week ii past pressing OK once.

Side by side, the screen will read OFF, DAYSAV, Calendar month, eleven WK 1. Select month xi by pressing OK in one case. Select week 1 by pressing OK once.

Your timer is at present outfitted to suit itself for daylight savings.

• Location

Your screen will now read AL US. Apply the punch to coil through until y'all detect your state of residence. Selected your state by pressing the OK push button once. Now, you'll need scroll to select approximately where you alive in your state. For example, if you live in the primal expanse of your country select CTR; if you live in the North East corner of your state select NE. Once y'all've scrolled to the correct location, press the OK push once.

• Time Zone

Your screen volition now read TZ CENT. You'll demand to select the fourth dimension zone y'all live in. For example, if you live in Utah, you'll use the dial to whorl to MNTN (Mountain Time). Once you lot've scrolled to the correct time zone for your land, press the OK push in one case.

• Dawn/Sunset

Your screen will at present read DAWN at the top with a blinking time below. Practise Non adjust the time. Printing OK ONCE. Your screen volition at present read Dusk at the summit with a blinking fourth dimension beneath. Again, do not arrange the time. Press OK once.

Your initial programming for time, date and location are at present complete!

Programming ON/OFF Times

At present that your time, appointment and location are entered into the timer, you lot're now ready to brainstorm programming the ON/OFF times for your lights.

Start, consider how you lot would similar your lights to operate. Some people prefer their lights to remain powered on from dusk to dawn, while others prefer dusk to midnight. Its entirely upwards to you.

Programming your timers On / Off times can be catchy the first time, and so go slowly and take your time.

On Time

If y'all're looking at your timer'due south clock, printing the PROG (program) push button once. You lot volition at present meet the number one flashing on the display. This indicates event one. Press the PROG button one time to select event 1 for programming.

You will now see SKIP blinking on the screen. Turn the round dial to ringlet through until the screen reads DUSK. Exist sure that the screen too reads ON in the top left corner. Printing the PROG button once.

On the bottom of the display you'll see the days of the calendar week flashing. Be sure that all days are flashing. If all days of the calendar week are not flashing, carefully whorl through the days until all days are flashing in unison. This will program your on time effect to apply to all days of the week. If all days of the week are flashing, printing the PROG push one time.

Off Time

For this case, we will set the off time for 12:00 a.k.

Yous will now meet the number 2 flashing on the display. Press the PROG push in one case to brainstorm programming event 2. Scroll through until the display reads 12:00 a.m. with OFF flashing in the upper left corner. Press the PROG button in one case.

On the lesser of the display you'll see the days of the week flashing. Similar before, select all days of the week when they are flashing by pressing the PROG button one time.

Next, select the hour. You can prepare the off fourth dimension to any time suits your needs best. Merely for this instance, we will set the off time for 12:00 a.m.

When 12 is flashing for the hour, press the PROG button in one case. When 00 is flashing for the infinitesimal, press the PROG push button once.

CHECK ALL EVENTS

Cheque all the events to brand sure there aren't whatsoever events programmed that shouldn't be. After completing the previous stride, yous should come across the number 3 flashing on the display. Use the knob to advisedly curlicue through all programmable events. There are 28 full. If there are no other events programmed, press the OK button one time. Your timer is now ready to go.

If there is a rouge event programmed, it will need to exist cleared.

To clear an effect, first select the upshot by pressing the PROG button one time. Now that you lot've selected the event, advisedly coil through the program options until the display reads - - - -.  SKIP volition exist flashing to a higher place the consequence number. Printing the PROG button in one case. The rouge event has now been removed.

Tips and Tricks

Here are a few helpful tricks to further help you in your timer's programming.

In that location are 4 buttons below the display. The Mode push allows yous to  select betwixt iv different operating modes: Human, Car, RAND and CLOCK.

• MAN (manual)- The timer will salve the existing programs, but volition not initiate them.
     Use this mode if you want to manually turn your lights on and off with the ON/OFF button.
• AUTO (automated) - The timer will automatically follow your program.
•   RAND (random) - The timer will follow your basic programming with random
   variations in ON/OFF times.
• CLOCK (current time) - Accommodate the clock without resetting all programs. If yous've
    scrolled to CLOCK, select it by pressing the OK button once. Adjust hour, so adjust
    minutes.

Ready to Get!

Your low voltage mural lighting timer is now ready and set up to become. If yous are still struggling to get your timer to piece of work correctly, check the batteries. The batteries tin be easily replaced by removing the small console on the back of the timer in the top correct corner.

Landscape Lighting Makes All the Difference

At Landscape Lighting Pro of Utah, the fine art of outdoor illumination is a real passion we piece of work to perfect. Designing elegantly bespoke landscape lighting systems is merely all we practice. For over 15 years, our award winning team of designers and craftsmen have striven to bring the best outdoor lighting experience possible to people'due south homes and businesses beyond the Wasatch Front and beyond.

Located in Midvale, Landscape Lighting Pro of Utah installs, maintains, and repairs lighting systems throughout Utah's residential areas, including Salt Lake City, Park City, Draper, Davis & Utah Counties.

If yous have an upcoming project yous'd like help with, call united states of america at (801)440-7647 for more than information, schedule a costless consultation, or feel free to just fill out a contact form.

 

Source: https://www.utahlights.com/blog/how-to-reset-reprogram-your-landscape-lighting-timer

Share this post